Ceramic Heater Bands, Custom Design Ceramic Heaters, Blown Film





Ceramic Band Heaters - Termination Styles
	G Style - Terminal box A practical way to protect screw terminals from damage and exposure
	B Style - Post terminals The most commonly used termination style. Recommended for high amperage applications
	H Style - Straight armor cable Provides protection against abrasion and contamination
	E Style - Stainless steel braid Highly flexible. Protects the lead wire from abrasion
	K00 Style - European connector Ideal termination style when the power leads are frequently removed from the heater. An easy electrical connection when the heater fails.
	K90 Style - European Used when there is not enough clearance above a heater to use the K00 style European connector K90 Style - European The current amperage limitation for lead wire exiting directly from a heater is 10 amps. For higher than 10 amp applications, lead wires should be combined with a terminal box. European plugs are adequate for 16 amps. To have a balanced internal winding, it is recommended to locate the terminals at 180 degrees with respect to the gap. Ceramic covers could be added to provide safety to exposed terminals.
Back to Ceramic Band Heaters Product page





phone: 905.859.8225 fax: 905.859.4691
toll free: 1.877.674.9744
sales@nphheaters.com


Ceramic Heater Bands, Custom Design Ceramic Heaters, Blown Film Terms & Conditions
Questions or comments about this site? Contact webmaster
© National Plastic Heater Sensor & Control Co. 2000

Ceramic Band Heaters - Termination Styles