Melt Pressure Transducers with 6 pin Connector Melt Pressure Transducers with 6 pin Connector Melt Pressure Transducers with 6 pin Connector
 
Melt Pressure Transducers with 6 pin Connector

OR call toll free:
1.877.674.9744

Melt Pressure Transducers with 6 pin Connector
& ± 0.25% Accuracy

Melt Pressure Transducers with 6 pin Connector & ± 0.25% Accuracy MODEL 0110
The 0110 converts applied pressure at the point of measurement to a proportional voltage output signal using well established bonded strain gage design principles. The small capillary tube filled with a special medium isolates the strain gage and electronics from potential thermal damage. The rigid stem makes installation fast and easy.
FEATURES
These melt pressure transducers are specifically designed for accuracy, stability and repeatability. They give a ± 0.5% combined error (± 0.25% accuracy) performance that equals or exceeds any other strain gage melt pressure transducer on the market today.
  • Fully interchangeable with all existing strain gage melt pressure transducers

  • Fluid filled system for temperature stability

  • 80% output signal for easy calibration

  • Compatible with all strain gage signal conditioning and readout instrumentation

  • Armoloy coated diaphragm

  • Other diaphragms available

C E

Melt Pressure Transducers with 6 pin Connector & ± 0.25% Accuracy MODEL 0111
The 0111 offers all the advantages of Model 0110, but incorporates an 18-inch flexible capillary tubing with stainless steel armored jacket between the strain gage housing and the stem.

These transducers are designed for applications requiring further thermal isolation or where installation would be otherwise difficult or impractical.

Melt Pressure Transducers with 6 pin Connector & ± 0.25% Accuracy

MODEL 0112
The 0112 provides simultaneous measurement of pressure and temperature at a single point.

Only one mounting hole is required for installation. The thermocouple or optional RTD is protected from process hazards and can be replaced without interrupting the pressure signal. Pressure performance is identical to Models 0110 and 0111.

Quotation Request Form

(Please complete the fields below)

Melt Pressure Transducers
Mechanical Pressure Range
Available Diaphragms
Stem Length
Flex Armor Length
Connector Version
Mounting Connections
Other Application Details
Quantity

 

 

First Name Last Name
Company Name Position
Address City/State/Province
Zip/Postal Code Country
Phone Number Fax Number
Toll Free Number Email
Web Site OEMDistributorProcess User
Quotation Request Required Delivery Date
have a salesperson contact me

 

 

 

 
Melt Pressure Transducers with 6 pin Connector
Melt Pressure Transducers with 6 pin Connector
Melt Pressure Transducers with 6 pin Connector

phone: 905.859.8225       fax: 905.859.4691

toll free: 1.877.674.9744

Melt Pressure Transducers with 6 pin Connectorsales@nphheaters.comMelt Pressure Transducers with 6 pin Connector
 
Melt Pressure Transducers with 6 pin Connector Melt Pressure Transducers with 6 pin Connector Melt Pressure Transducers with 6 pin Connector
Melt Pressure Transducers with 6 pin Connector Quotation Request
Terms & Conditions
Questions or comments about this site? Contact webmaster
© National Plastic Heater Sensor & Control Co. 2000