OR call toll free:
1.877.674.9744

Melt Pressure Transmitters with 6 pin Connector
& 0-10Vdc Output

MODEL 0270
The 0270 converts applied pressure at the point of measurement to a proportional voltage output signal. An amplifier converts the strain gage signal to a 0-10 volt output. The small capillary tube filled with a special medium isolates the amplifier from potential thermal damage. The rigid stem makes installation fast and easy.

FEATURES
The ISI 0270 Series Melt Pressure Transmitter is based on the same basic fluid capillary and strain gage design found in ISI's high accuracy line of melt pressure transducers.

Factory mutual approved for Class I, Div.1, Groups B, C, D
High level output 3 and 4-wire, 0-10 Vdc
Better than 0.5% combined error (±0.25% accuracy)
Fluid filled system for temperature stability
80% output signal for easy calibration
Armoloy coated diaphragm
Other diaphragms available

MODEL 0271
The 0271 offers all the advantages of Model 0270, but incorporates an 18-inch flexible capillary tubing with stainless steel armored jacket between the amplifier housing and the stem.

These transmitters are designed for applications requiring further thermal isolation or where installation would be otherwise difficult or impractical.

MODEL 0272
The 0272 provides simultaneous measurement of pressure and temperature at a single point.

Only one mounting hole is required for installation. The thermocouple or optional RTD is protected from process hazards and can be replaced without interrupting the pressure signal. Pressure performance is identical to Models 0270 and 0271.

(Please complete the fields below)
Melt Pressure Transmitters
Mechanical Pressure Range
Available Diaphragms
Stem Length
Flex Armor Length
Connector Version
Mounting Connections
Other Application Details
Quantity

First Name		Last Name
Company Name		Position
Address		City/State/Province
Zip/Postal Code		Country
Phone Number		Fax Number
Toll Free Number		Email
Web Site		OEMDistributorProcess User
Quotation Request		Required Delivery Date
have a salesperson contact me