OR call toll free:
1.877.674.9744

Melt Pressure Transmitters -
FM and CSA Explosion Proof Approved

MODEL 0140W
The 0140W converts applied pressure at the point of measurement to a proportional voltage output signal. They utilize high sensitivity, semiconductor strain gages for optimum performance. An amplifier converts the strain gage signal to a 4-20 mA output. The small capillary tube filled with a special medium isolates the amplifier from potential thermal damage. The rigid stem makes installation fast and easy.

FEATURES
The ISI 0140W Series Melt Pressure Transmitter entire amplifier/sensor assembly is packaged in an all metal welded enclosure with a conduit cable fitting. This metal enclosure is completely sealed from the atmosphere, and is approved to meet hazardous area requirements.

Factory mutual approved for Class I, Div.1, Groups B, C, D
High level output 2-wire, 4-20 mA;
Better than 0.5% combined error (±0.25% accuracy)
Fluid filled system for temperature stability
Armoloy coated diaphragm
Other diaphragms available

C E

MODEL 0141W
The 0141W offers all the advantages of Model 0140W, but incorporates an 18-inch flexible capillary tubing with stainless steel armored jacket between the amplifier housing and the stem.

These transmitters are designed for applications requiring further thermal isolation or where installation would be otherwise difficult or impractical.

MODEL 0142W
The 0142W provides the capability of a simultaneous measurement of pressure and temperature at a single point.

Only one mounting hole is required for installation. A custom installed, approved thermocouple or RTD is protected from process hazards and can be replaced without interrupting the pressure signal. Pressure performance is identical to Models 0140W and 0141W.

(Please complete the fields below)
Melt Pressure Transmitters
Mechanical Pressure Range
Available Diaphragms
Stem Length
Flex Armor Length
Connector Version
Mounting Connections
Other Application Details
Quantity

First Name		Last Name
Company Name		Position
Address		City/State/Province
Zip/Postal Code		Country
Phone Number		Fax Number
Toll Free Number		Email
Web Site		OEMDistributorProcess User
Quotation Request		Required Delivery Date
have a salesperson contact me